For which applications ?
With Domino Pogo RGB, effects can be maximised thanks to RGB management of 7 colours that can be mixed in a large number of programmes.
With their wide diameter (20 mm), Domino Pogo RGB produce a large shaft of light similar to the luminous flux of a neon tube.
• They can be used to create all sorts of patterns, in particular in large signs. The possibilities are endless by modifying the distance between LEDs, grouping them into patches of light and mixing colours.
• Signs have maximum visibility thanks to the 180° lighting.
LEDs installation
Domino Pogo RGB dimensions are available in vectorised format. The file is supplied on a CD-Rom and can also be downloaded from www.dominosign.net.
• Minimum and maximum spacing between LEDs:
- minimum centre to centre distance: 32 mm
- maximum centre to centre distance: 100 mm
• Diameter of clipping hole 23.9 mm. Allowance must be made for the thickness of any layers of paint when piercing holes in the support. Tests will be required depending on the type of paint and applicator.
• Thickness of support (PMMA, aluminium or composite sheet) between 1 and 4 mm
• The power of the 24 V electricity supply is obtained by multiplying the consumption of one LED by the number of LEDs . Use this calculation to determine the controller size (650 W or 1950 W).
