Installation
The support must be clean. Domino Multimax are inserted into the perforations and are fixed by pressure in the axle of the hole on the back of the module until the flange is fixed on the support.
The ring can be thus placed on the front side of the support. It will be easy to fix the ring in the lips of the base, according to the adjustment of the base in its support.
There are two levels to provide different thicknesses of supports:
Level 1 : thickness less or equal to 2 mm
Level 2 : thickness less or equal to 3 mm
The ring can be attached by fixing onto the cap. It is also possible to fix the ring on the base and then attach the cap. Warning: it is imperative to place the ring just as it is shown in the pictures 3 and 4, because the base is not symmetric.
In accordance with the adjustment of the base in the hole of support, you should sometimes keep pressing on the back of the base. Indeed, the more precise adjustment is, less you have to press. On the other hand, a solid attachment of the base in its support provides the ring a good fixation. It makes thus the positioning of caps possible and long-lasting in accordance with chosen angles (example: picture 6). The Domino Multimax inspires the creativity as well.
