INSTALLATION
1. The striplight is supplied in lengths between 300 mm and 2940 mm. If a longer length is required, the tubes will be coupled together using sleeves.
2. The cable outlet indicates the ideal position for the first bracket. The next ones are then fi tted symmetrically. The first bracked is positioned, followed by the second, by inserting them and sliding them carefully along the rail. Then mark the locations of the drilling points, checking them using a level, before fixing the bracket. The rail must be able to pivot freely in the brackets. Repeat these steps if there are any other brackets to be fixed.
3. Once the rail has been fixed, feed the cable along the bracket (in the groove provided for this purpose) and connect directly to a 220 V power supply.
4. Then optimise the lighting by adjusting the rail. 42
